Series 3899.B
Kit for plate radiator replacement
| Mixing and power supply module for replacing a radiator terminal with a ceiling or floor radiant system. The kit can be derived from any radiator terminal, both single-pipe and double-pipe, and is supplied complete with basic plate for free installation. |
| Galvanised sheet plate. |
| Module shut-off ball valves; Adjustment unit complete with by-pass for single-pipe circuit, check valve and calibration lockshield valve. 3-way mixing valve with adjustment from 27 to 63°C. |
| Electronic circulator UPM3 AUTO 15-70. Minimum temperature thermostat pre-set to 55°C. Delivery dial thermometer. |
| Internally pre-wired electrical terminal board. Set-up for direct heat meter. Set-up for wireless room thermostat control receiver. |
| External frame dimensions (LxD): 503x392 mm |
| Max depth: 134 mm |
| Threaded connections: 3/4" M |
| Circuit kits that can be powered: 3 n |
| Max deliverable head: 70 kPa |
| Delivery rate at max head: 800 l/h |
| Power supply: 230V AC |
| Power demand: 52W |
| Electrical protection: IP 20 |
Kit for plate radiator replacement
| Code | Box | Carton | Cat. | € |
| 38990010 | 1 | 1 | 70.02 | -- |
Idoneo per alimentare un impianto radiante con uno sviluppo massimo consigliato di 30 m² suddiviso in 3 circuiti da 10 m² cadauno.
Per l'alimentazione dei 2 o 3 circuiti, a soffitto o a pavimento, si consiglia l'utilizzo degli appositi kit di distribuzione.
Versione senza cassetta per installazione libera.
Kit predisposto per l'alloggio e il cablaggio di:
- attuatore remoto per cronotermostati con ricevitore wireless
- antenna per attuatore remoto.
Abbinabile a cronotermostati ambiente con ricevitore wireless serie 3405M e 3406M.